Double Row Full Complement Cylindrical Roller Bearings

BLS cylindrical roller bearings have many designs, dimension series and sizes. The majority is single row bearings with a cage. Single and double row full complement bearings (without cage) complete the BLS standard assortment for general engineering. Bearings with a cage can accommodate heavy radial loads and operate at high speeds. Full complement cylindrical roller bearings are suitable for very heavy radial loads at moderate speeds.

The rollers of BLS cylindrical roller bearings are key components. Their geometry, the so-called logarithmic profile, provides an optimum stress distribution in the contact zones in the bearing. Their surface finish maximizes lubricant film formation and optimizes rolling motion of the rollers. The benefits derived from this compared with traditional designs include enhanced operational reliability and a greater insensitivity to misalignment.

The range of BLS cylindrical roller bearings comprises the basic types.
MBY® single row cylindrical roller bearings, caged, mainly of the NU, NJ, NUP and N designs.
MBY® double row cylindrical roller bearings, caged, mainly of the NNUand NN designs.
MBY® single row full complement cylindrical roller bearings, mainly of the NCF and NJG designs.
MBY® double row full complement cylindrical roller bearings, mainly of the NNF design.

BLS cylindrical roll bearings have the following design features:
1. Optimized design in ribs and rollers to enhance the axial load capacity
2. Optimized design in the geometric surface between rollers and raceway to balance the radial load distribution
3. Limit the width of raceway undercut, increase the contact area between raceway and rollers and enhance the radial load capacity
4. High standard material, strictly control the element content, e.g. Ti<30ppm
5. Low noise design, reaches to V1 grade noise level, contributes to the quieter running of automobile engine and gearbox.

Inquire Now Next Product

Product Details

Deep Groove Ball Bearings

Double Row Full Complement Cylindrical Roller Bearings

I have all the models you need, these are just some of them, please contact us now

d	D	B	C	Fw	Ew	Rmin	M	Cr KN	Cor KN	n	Bearing	D1	D2	D3	D4
							(kg)			(1/min)	Code
150	190	40	20			1.1	2.9	237	550	1910	SL014830	158	158	182	182
160	200	40	20			1.1	3.1	243	580	1800	SL014832	168	168	190	190
170	215	45	22.5			1.1	4.1	265	620	1680	SL014834	178	178	205	205
180	225	45	22.5			1.1	4.3	275	660	1600	SL014836	190	190	215	215
190	240	50	25			1.5	5.65	315	750	1510	SL014838	200	200	230	230
200	250	50	25			1.5	5.9	325	790	1440	SL014840	210	210	240	240
220	270	50	25			1.5	6.4	340	870	1320	SL014844	230	230	260	260
240	300	60	30			2	10	520	1290	1200	SL014848	250	250	290	290
260	320	60	30			2	11	540	1400	1120	SL014852	270	270	310	310
280	350	69	34.5			2	16	710	1860	1030	SL014856	290	290	340	340
300	380	80	40			2.1	23	830	2120	950	SL014860	315	315	365	365
320	400	80	40			2.1	24	860	2280	900	SL014864	335	335	385	385
340	420	80	40			2.1	25.5	880	2390	850	SL014868	355	355	405	405
360	440	80	40			2.1	27	910	2550	810	SL014872	375	375	425	425
380	480	100	50			2.1	45.5	1330	3550	750	SL014876	400	400	465	465
400	500	100	50			2.1	46.5	1360	3700	720	SL014880	420	420	480	480
60	85	25	12.5			1	0.49	71	125	4450	SL014912	65	65	79	79
70	100	30	15			1	0.78	108	189	3800	SL014914	76	76	94	94
80	110	30	15			1	0.88	115	211	3400	SL014916	86	86	104	104
90	125	35	17.5			1.1	1.35	155	295	3000	SL014918	96	96	118	118
100	140	40	20			1.1	1.95	196	380	2700	SL014920	108	108	132	132
110	150	40	20			1.1	2.15	204	410	2490	SL014922	118	118	142	142
120	165	45	22.5			1.1	2.95	228	455	2270	SL014924	130	130	157	157
130	180	50	25			1.5	3.95	265	530	2090	SL014926	140	140	170	170
140	190	50	25			1.5	4.2	275	570	1960	SL014928	150	150	180	180
150	210	60	30			2	6.65	415	840	1800	SL014930	160	160	200	200
160	220	60	30			2	7	435	900	1710	SL014932	170	170	210	210
170	230	60	30			2	7.35	445	950	1620	SL014934	180	180	220	220
180	250	69	34.5			2	10.8	580	1230	1510	SL014936	190	190	240	240
190	260	69	34.5			2	11.2	590	1290	1440	SL014938	200	200	250	250
200	280	80	40			2.1	15.8	690	1480	1350	SL014940	215	215	265	265
220	300	80	40			2.1	17.2	720	1590	1250	SL014944	235	235	285	285
240	320	80	40			2.1	18.5	750	1740	1160	SL014948	255	255	305	305
260	360	100	50			2.1	32	1120	2500	1050	SL014952	275	275	345	345
280	380	100	50			2.1	34	1170	2700	980	SL014956	295	295	365	365
300	420	118	59			3	53	1650	3800	900	SL014960	320	320	400	400
320	440	118	59			3	56	1720	4100	850	SL014964	340	340	420	420
340	460	118	59			3	59	1770	4300	810	SL014968	360	360	440	440
360	480	118	59			3	62.1	1810	4500	770	SL014972	380	380	460	460
380	520	140	70			4	92.4	2280	5600	720	SL014976	400	400	500	500
400	540	140	70			4	96.5	2340	5900	690	SL014980	420	420	520	520
150	190	40	20		178.3	1.1	2.8	237	550	1910	SL024830	156	156	184	184
160	200	40	20		186.9	1.1	3	243	580	1800	SL024832	166	166	194	194
170	215	45	22.5		201.3	1.1	3.95	265	620	1680	SL024834	178	178	208	208
180	225	45	22.5		214.1	1.1	4.15	275	660	1600	SL024836	188	188	219	219
190	240	50	25		225	1.5	5.45	315	750	1510	SL024838	200	200	232	232
200	250	50	25		235.5	1.5	5.7	325	790	1440	SL024840	210	210	242	242
220	270	50	25		256.5	1.5	6.2	340	870	1320	SL024844	230	230	263	263
240	300	60	30		281.9	2	9.9	520	1290	1200	SL024848	250	250	290	290
260	320	60	30		304.2	2	10.6	540	1400	1120	SL024852	270	270	312	312
280	350	69	34.5		332.4	2	15.6	710	1860	1030	SL024856	290	290	340	340
300	380	80	40		356.7	2.1	22	830	2120	950	SL024860	315	315	370	370
320	400	80	40		379.7	2.1	23.5	860	2280	900	SL024864	335	335	390	390
340	420	80	40		396.9	2.1	25	880	2390	850	SL024868	355	355	412	412
360	440	80	40		419.8	2.1	26	910	2550	810	SL024872	375	375	430	430
380	480	100	50		455.8	2.1	44	1330	3550	750	SL024876	395	395	468	468
400	500	100	50		470.59	2.1	45.8	1360	3700	720	SL024880	415	415	485	485
60	85	25	12.5		77.51	1	0.47	71	125	4450	SL024912	65	65	80	80
70	100	30	15		91.87	1	0.75	108	189	3800	SL024914	75	75	95	95
80	110	30	15		100.78	1	0.85	115	211	3400	SL024916	85	85	105	105
90	125	35	17.5		115.2	1.1	1.3	155	295	3000	SL024918	96	96	120	120
100	140	40	20		129.6	1.1	1.9	196	380	2700	SL024920	106	106	135	135
110	150	40	20		138.2	1.1	2.1	204	410	2490	SL024922	116	116	144	144
120	165	45	22.5		153.55	1.1	2.85	228	455	2270	SL024924	130	130	158	158
130	180	50	25		165.4	1.5	3.8	265	530	2090	SL024926	140	140	172	172
140	190	50	25		175.9	1.5	4.1	275	570	1960	SL024928	150	150	182	182
150	210	60	30		192.77	2	6.45	415	840	1800	SL024930	160	160	202	202
160	220	60	30		206.16	2	6.8	435	900	1710	SL024932	170	170	212	212
170	230	60	30		215.08	2	7.1	445	950	1620	SL024934	180	180	222	222
180	250	69	34.5		230.5	2	10.5	580	1230	1510	SL024936	190	190	240	240
190	260	69	34.5		240.7	2	10.9	590	1290	1440	SL024938	200	200	250	250
200	280	80	40		259.34	2.1	15.3	690	1480	1350	SL024940	215	215	270	270
220	300	80	40		276.52	2.1	16.7	720	1590	1250	SL024944	235	235	288	288
240	320	80	40		299.46	2.1	17.9	750	1740	1160	SL024948	255	255	308	308
260	360	100	50		331.33	2.1	31.2	1120	2500	1050	SL024952	275	275	345	345
280	380	100	50		353.34	2.1	33.1	1170	2700	980	SL024956	295	295	365	365
300	420	118	59		385.51	3	51.9	1650	3800	900	SL024960	320	320	400	400
320	440	118	59		412.27	3	54.9	1720	4100	850	SL024964	340	340	420	420
340	460	118	59		430.11	3	57.8	1770	4300	810	SL024968	360	360	440	440
360	480	118	59		447.95	3	60.8	1810	4500	770	SL024972	380	380	460	460
380	520	140	70		481.35	4	90.5	2280	5600	720	SL024976	400	400	500	500
400	540	140	70		501.74	4	94.6	2340	5900	690	SL024980	420	420	520	520
130	190	80	79			0.6	7.5	430	790	800	SL04130-PP	140	140	206	206
140	200	80	79			0.6	8	445	840	750	SL04140-PP	150	150	216	216
150	210	80	79			0.6	8.4	465	920	700	SL04150-PP	162	162	226	228
160	220	80	79			0.6	8.8	480	970	700	SL04160-PP	170	172	236	236
170	230	80	79			0.6	9.3	490	1030	650	SL04170-PP	192	192	260	260
180	240	80	79			0.6	9.8	500	1080	600	SL04180-PP	192	192	260	260
190	260	80	79			0.6	12.7	520	1130	550	SL04190-PP	204	204	282	282
200	270	80	79			0.6	13.2	540	1210	550	SL04200-PP	214	214	292	292
220	300	95	94			1	19.5	700	1550	480	SL04220-PP	234	234	322	322
240	320	95	94			1	21	740	1700	480	SL04240-PP	256	256	346	346
260	340	95	94			1	22.5	840	1990	440	SL04260-PP	276	276	366	366
300	280	95	94			1	25.5	900	2250	380	SL04300-PP	314	314	406	406
20	42	30	29			0.3	0.2	40.5	49	4000	SL045004-PP	25	25	47	47
25	47	30	29			0.3	0.24	44.5	58	3600	SL045005-PP	30	30	52	52
30	55	34	33			0.3	0.37	50	67	3000	SL045006-PP	35	35	60	60
35	62	36	35			0.3	0.48	63	88	2600	SL045007-PP	40	40	67	67
40	68	38	37			0.6	0.56	76	103	2400	SL045008-PP	45	45	75	75
45	75	40	39			0.6	0.7	92	130	2200	SL045009-PP	51	51	82	82
50	80	40	39			0.6	1.76	97	142	2000	SL045010-PP	56	56	87	87
55	90	46	45			0.6	1.18	115	175	1800	SL045011-PP	62	62	99	99
60	95	46	45			0.6	1.26	120	189	1700	SL045012-PP	67	67	104	104
65	100	46	45			0.6	1.33	125	203	1600	SL045013-PP	72	72	109	109
70	110	54	53			0.6	1.87	168	265	1400	SL045014-PP	78	78	119	119
75	115	54	53			0.6	1.96	194	300	1400	SL045015-PP	83	83	124	124
80	125	60	59			0.6	2.71	203	325	1300	SL045016-PP	88	88	137	137
85	130	60	59			0.6	2.83	211	350	1200	SL045017-PP	95	95	142	142
90	140	67	66			0.6	3.71	305	510	1100	SL045018-PP	100	100	152	152
95	145	67	66			0.6	3.88	315	530	1100	SL045019-PP	105	105	157	157
100	150	67	66			0.6	3.95	330	550	1000	SL045020-PP	110	110	162	162
110	170	80	79			0.6	6.57	395	680	900	SL045022-PP	120	120	182	182
120	180	80	79			0.6	7.04	410	740	900	SL045024-PP	130	130	196	196
130	200	95	94			0.6	10.5	540	960	800	SL045026-PP	142	142	216	216
140	210	95	94			0.6	11.1	610	1100	750	SL045028-PP	152	152	226	226
150	225	100	99			0.6	13.3	710	1260	700	SL045030-PP	162	162	245	245
160	240	109	108			0.6	16.6	740	1360	650	SL045032-PP	175	175	260	260
170	260	122	121			0.6	22.6	960	1750	600	SL045034-PP	185	185	282	282
180	280	136	135			0.6	30.1	1140	2130	550	SL045036-PP	195	195	302	302
190	290	136	135			0.6	31.5	1160	2210	550	SL045038-PP	205	205	312	312
200	310	150	149			0.6	40.8	1350	2600	500	SL045040-PP	320	320	336	336
220	340	160	159			1	52.5	1570	3050	480	SL045044-PP	240	240	366	366
240	360	160	159			1	56	1630	3300	440	SL045048-PP	260	260	386	386
260	400	190	189			1.1	84.5	2380	4700	400	SL045052-PP	280	280	426	426
280	420	190	189			1.1	90	2600	5200	380	SL045056-PP	300	300	453	453
300	460	218	216			1.1	126	3000	5800	340	SL045060-PP	320	320	493	493
20	42	30	15		36.81	0.6	0.2	53	53	10500	SL185004	25	25	38	38
25	47	30	15		42.51	0.6	0.23	60	65	9000	SL185005	30	30	43	43
30	55	34	17		49.6	1	0.35	78	84	7600	SL185006	35	35	51	51
35	62	36	18		55.52	1	0.46	94	109	6700	SL185007	40	40	57	57
40	68	38	19		61.74	1	0.56	113	136	6000	SL185008	45	45	63	63
45	75	40	20		66.85	1	0.71	120	151	5400	SL185009	50	50	69	69
50	80	40	20		72.33	1	0.76	151	191	5000	SL185010	55	55	74	74
55	90	46	23		83.54	1.1	1.16	206	275	4450	SL185011	61	61	85	85
60	95	46	23		86.74	1.1	1.24	212	290	4200	SL185012	76	76	89	89
65	100	46	23		93.09	1.1	1.32	223	320	3950	SL185013	71	71	95	95
70	110	54	27		100.28	1.1	1.85	265	355	3600	SL185014	76	76	104	104
75	115	54	27		107.9	1.1	1.93	275	390	3400	SL185015	82	82	109	109
80	125	60	30		117.4	1.1	2.59	295	450	3150	SL185016	87	87	119	119
85	130	60	30		121.95	1.1	2.72	305	475	3000	SL185017	92	92	124	124
90	140	67	33.5		130.65	1.5	3.62	355	560	2800	SL185018	98	98	133	133
100	150	67	33.5		140.2	1.5	3.94	375	620	2600	SL185020	108	108	143	143
110	170	80	40		156.7	2	6.32	490	790	2310	SL185022	118	118	160	160
120	180	80	40		168.15	2	6.77	520	870	2160	SL185024	130	130	170	170
130	200	95	47.7		184.4	2	10.2	740	1230	1960	SL185026	140	140	188	188
140	210	95	47.5		198.4	2	11.1	780	1360	1850	SL185028	150	150	200	200
150	225	100	50		207.45	2	13.3	810	1390	1730	SL185030	160	160	210	210

Deep Groove Ball Bearings

Deep Groove Ball Bearings Widely used in various industries, our bearings meet the requirements of your project！

Deep Groove Ball Bearings

1.FREE SAMPLES:
contact us by email or trade manager, we will send the free sampls according to your request.

2. World Class Bearing:We provide our customers with all type of indigenous bearing with world class quality.

3. OEM or Non Stand Bearings: Any requirement for Non standard bearings is Easily Fulfilled by us due to
 its vast knowledge and links in the industry. 

4. Genuine products With Excellent Quality: Company has always proved the 
 100% quality products it provides with genuine intent.

5.After Sales Service and technical Assistance: Company provides after sales service and technical assistance 
 as per the customers requirement and needs.

6. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.

7. Cost Saving: We provide long-life, shock-resistant and high reliability bearings with 
 excellent quality and better performance. Resulting in increased cost saving.

8.Attending customer queries promptly: We believe that if customer are satisfied then it proves our worth well. Customers are always given quick support.

Deep Groove Ball Bearings

Products Pdf

Tags: miniature cylindrical roller bearings, ceramic cylindrical roller bearing, link belt cylindrical roller bearings, cylindrical bearing rollers, cylindrical taper roller bearing, cylindrical needle roller bearing, high speed cylindrical roller bearings, nup cylindrical roller bearing, nsk cylindrical roller bearings, cylindrical roller bearing manufacturers

Inquiry